Enecharger NC500U 4-10 Cell NiCd/NiMH Charger

Enecharger NC500U 4-10 cell NiCd/NiMH smart battery charger with Tamiya plug output

Enecharger’s NC500U is ideal for NiCd & NiMH battery packs consisting of 4 to 10 cells.

The NC500U features:

• 240VAC input.
• 500mA DC charge current.
• Output via Tamiya plug.
• Microprocessor control with delta peak cut-off.
• Automatic cell detection, reverse polarity and short circuit protection.
• LED indicators:
  • 1 LED steady: 30%
  • 2 LEDs steady: 50%
  • 3 LEDs steady: 70%
  • 4 LEDs steady: 90%
  • GREEN LED: Fully charged and trickle charge
  • FLASHING RED / GREEN LED: error – short circuit
  • FLASHING RED LED: error – reverse polarity or wrong battery

For more information on charging NiCd/NiMH batteries refer to Simpower’s FAQ’s.

Different adaptors available – talk to us now about your requirements.

​

	CC01-100	Non-reversible polarity plug to female Tamiya type connector c/w 100mm leads
	CC05-300	Female Tamiya type connector to small alligator clips c/w 300mm leads
	CC25-120	Tamiya style female connector to metal case DC plug short shaft 2.5mm ID (centre positive).
	CC29-85	Female Tamiya connector to female t-plug Deans style connector (85mm with 16AWG leads)
	CC30-110	Female Tamiya connector to male Nikko type connector (110mm with 18AWG leads)
	CC31-150	Female Tamiya connector to male Traxxas type connector (150mm with 12AWG leads)
	CC32-75	Female Tamiya connector to female Nikko connector
	CC36-110	Female Tamiya connector to female JR/Hitech connector
	CC37-85	Female Tamiya connector to male t-plug Deans style connector (85mm with 16AWG leads)