A123 ANR26650M1B 26650 Lithium Iron Phosphate Battery

A123 AMP20M1HD-A 3.3V 19600mAh Lithium Iron Phosphate (LiFePO4) Battery EACH.

ANR26650M1B Lithium Iron Phosphate High Current Type Cylindrical Battery (Recommended maximum discharge current 70A) using patented Nanophosphate technology.

Lithiumwerks was formerly A123 systems

Features:

The ANR26650M1-B is the next generation of A123 Systems’ pioneering 26650 cylindrical cell, now with greater power and energy density and lower impedance. This versatile lithium ion cell is suitable for a wide variety of applications and system designs. Proven performance in the toughest conditions, combining durability, reliability, and safety, the ANR26650 cell offers an excellent combination of price-performance.

Cylindrical Cell Primary Applications

• Portable high power devices
• Stationary battery backup systems
• Grid stabilisation energy storage systems
• Commercial truck and bus hybrid electric vehicles (HEVs)

Nanophosphate® LiFePO4 Benefits

• Cycle Life at 1C/1C, 100% DOD, > 4000 cycles
• Safety: Excellent abuse tolerance and environmentally friendly
• Life: Excellent calendar life, 10X cycle life vs. conventional lithium ion

More information available on Lithiumwerks pack use.

Important Information Regarding Rechargeable Lithium Cells – LITHIUM ION (LiIon) & LITHIUM IRON PHOSPHATE (LiFePO4)

• Single unprotected cells are available to recognised customers. For safety information please read the section in our FAQs on battery safety
• PLEASE NOTE: All lithium rechargeable cells/packs supplied by Simpower without a Protection Circuit Module (PCM) will require a duly signed Product Indemnity Waiver (PIW) Simpower Indemnity Form Li-Ion Pack
• Do not attempt to charge these batteries using chargers for nickel based batteries or any charger not specifically designed for rechargeable lithium technology.
• This cell is manufactured for use in a battery pack assembly. It is not intended for use without a protection circuit. For equipment designed to use individual cells a protection circuit can be incorporated. Check out Simpower’s current range of protected lithium ion cells.
• Lithium ion cells can be assembled into single or multi-cell battery packs by authorised pack assembly centres such as our company that have been approved for safety circuit assembly and Lithium Ion pack design.
• For information on the safety circuits, more commonly known as a PCM, please click here for Protected_Circuit_Board_info or contact us.
• Simpower can also provide advice and components for intelligent Battery Management System’s (BMS) addtional to or incorporating PCM’s. It’s recommended that battery packs especially those featuring complex series/parallel cell assemblies incorporate a BMS in their construction. For further information please consult our sales engineering staff.
• For battery pack design enquiries please contact us with your requirements. If you already have some parameters please click here for a Battery Application work sheet and email it to us.